How to Altboot 75XX Series

The Altboot Procedure refers to loading a fresh Firmware / Operating system on the device. This wipes  all previous settings and configurations and is usually a last-ditch effort to fix software problems that we can't resolve using other methods. 

After performing an Altboot, the machine will be in a default state and will have to be completely reconfigured for the customers network. 

Download Links:

https://ssmd.hosted-by-files.com/Firmware/A3/75XX/062.121.002.14700/WorkCentre_7500-system-sw%2306212100214700%23.DLM

https://ssmd.hosted-by-files.com/Firmware/A3/.Alboot%20Files/DISABLE_DATA_BACKUP

https://ssmd.hosted-by-files.com/Firmware/A3/.Alboot%20Files/FORCED_UPGRADE

1. Insert a USB thumb drive into a computer.
2. Create a folder in the root of the USB drive called ALTBOOT. 
3. Download all three of the attached files and put them inside the ALTBOOT folder you created on the USB drive.
   Your USB drive should be empty except for a folder called ALTBOOT with these 3 files inside of it.
4. Eject the USB drive
5. Power down the Xerox
6. Insert USB drive into the USB port of the Xerox (on the FRONT of the machine)
7. Turn on the Xerox. 
8. ALTBOOT process will begin, it could take up to an hour. Check the screen periodically as it may prompt you to remove the USB drive from the machine. 
9. When process is complete machine will boot back up to the normal Home Screen.