FIrmware upgrade from USB on Versalink Models

Software Loading via the Special Boot Menu

NOTE: A video of this procedure is available on the EDOC. The video is accessible from the Library menu on the Service Interface.

1. Download the firmware (.bin) file, refer to Obtaining Machine Software.
2. Create a folder named ‘DWLD’ on the USB memory device.
3. Store the software download file (.bin) in the ‘DWLD’ folder
4. Switch off the machine, GP 10. Insert the USB memory device.
5. Enter special boot mode, GP 22. Select Download Mode on SPECIAL BOOT MENU 1/3, then touch YES. The UI will display SW update progress. The machine will eventually reboot.

CAUTION: Do not switch off the printer until the reboot is complete. The printer will reboot after the download is complete.

6. After the reboot, a Software Upgrade Report will print. Remove the USB memory device.